A. Our team is made up of the industry's most talented individuals.

B. Veneerstone offers the most extensive selection of style and colors in the industry.

C. Our molds are cast from natural stones. Each natural stone is meticulously chosen by our masons. These stones are then used as masters.

D. Each pattern has over 250 individual pieces of stone before a shape is repeated. Each stone is hand painted therefore no one stone will look a like.

E. We use one of the largest varieties of pigments in our coloring process.

F. Our 75 year limited warranty is the longest in the industry.

Manufactured stone is made from natural aggregates. It can be made to replicate the appearance of any natural stone found on Earth, in shape, color, and texture.

There are many advantages of using manufactured stone. Veneerstone is a fraction of the cost of natural stone. In addition, because it is light weight, no footings and less engineering is required. Reduced shipping cost, consistency in color and the ability to customize colors are just a few of the other advantages over natural stone.

There are significant cost savings in cost and installation.

The Veneerstone Limited Warranty:
Veneerstone carries a 75-year limited warranty when used on structures that conform to all local building codes. Material must be installed according to manufacturer’s installation instructions.

Warranty is limited to replacement of defective materials only and does not cover labor to remove or replace stone. Warranty does not cover damage resulting from building settlement, wall movement, contact with chemicals or paint, discoloration due to airborne contaminants or stains caused by material applied to or allowed to come in contact with stone. Warranty is non-transferable and is limited to the original purchaser.

Veneerstone is in complete compliance with UBC standards.

Veneerstone adds a touch of class and distinction to both residential and commercial projects. Whether our stone is used indoors or outdoors, no project is too big or small! With the proper preparation, Veneerstone can be installed over nearly any solid surface (must be installed according to manufacturer's installation instructions).

Yes, Veneerstone is commonly used around fireplaces. It is also a great product to use for remodeling.

It is not recommended to use manufactured stone around standing water or running water. Additionally, chlorine and other harsh chemicals used in swimming pools can cause damage to the stone and its color. Flashing, water proofing and the use of a reputable penetrable sealer can be used to deter any damage to the stone.

Veneerstone is sold through distributors. To find the distributor nearest you, see our distributor locator or call toll-free 1-877-878-6631 and a sales consultant will be happy to assist you.

We offer two packaging options:
Our bulk pallet holds 150 SF flats and 100 LF corners.
Our handy pack packaging holds 10 SF flats and 10 LF corners.
Our thin brick is offered in handy pack packaging holding 30 SF flats and 15 LF.

Our "Stack Stone" and "Ledge Stone" are packaged not factoring in a 1/2" mortar joint. All other stone styles are packaged factoring in a 1/2" mortar joint.

The weight of our products is between 8 -12 lbs per square foot (1,200 - 1,800 lbs per pallet).

The average thickness of our products is 1 ¾ inches. This may vary depending on stone style.

Standard product ships out within 24 to 48 hours of order placement. Orders should arrive in stores in 3 to 5 business days. Non standard product will require additional production time

Veneerstone reacts to the elements and ages the same as natural stone does. According to the majority of our customers, this "aging process" does not produce any undesirable color changes.

No. Veneerstone is classified by the Underwriters Laboratory as a non-combustible and non-flammable product.

Cleaning: For exterior areas where dust and/or dirt accumulate, stone should be periodically washed down. For areas that need more cleaning, scrub with a soft bristle brush in conjunction with a solution of granulated soap or detergent and water. Rinse with clean water afterwards.

NOTE: While installing, clean off residue mortar with a damp rag. Do not wait until mortar has dried to clean it off. Do Not use high pressure power washers, wire brushes, acid or acid based products.

Scuffing: Most scuffs can be removed with the cleansing methods mentioned previously. Sealing Veneerstone can also minimize scuffing. In most cases, scuffing will fade or disappear completely in time with no treatment at all.

In the unlikely event that efflorescence occurs, allow the stone to dry thoroughly, and then scrub with a soft bristle. Rinse immediately with clean water and allow it to dry. If efflorescence is still visible, scrub with a solution of 1 part white vinegar and 5 parts water. Rinse with clean water.

Overtones of color are integrated into the stone during the molding process, while the base color of the stone is blended entirely throughout.

Please call 1-877-878-6631 and a sales consultant will be glad to assist you.

The photographs of our stone are of actual Veneerstone projects and are accurate renderings of the stone’s colors. However, we recommend ordering a sample board to assist you in your color selection.

When you first receive your stone the color may appear darker than that of the sample board. After a short time, the stone will cure to reveal its "natural color".